 |
| Crunchy rubber. This was one of the "good" ones! |
I'll take this opportunity to just say thanks. The service was exactly what online service should be, but very rarely is. I'd done some research, figured out what I wanted, and found it online. I halfheartedly clicked the "order" button about 5PM, hoping I'd get something in the mail in a week or two. Around 9AM the very next morning my package arrived, all for a shipping charge of five dollars and thirty-three cents. So, McMaster-Carr, thank you!
I carefully cleaned out the old gaskets, tightened the screws, checked the glazing, and fitted the new gasket material into the groove. I sealed the ends with a dab of flexible super glue, and did not seal the rubber to the frames in any way. Reinstallation went as expected, although the rubber was not as flexible as I'd have hoped.
 |
| Rubber and glue |
The ends of the rubber were joined on top of the portholes, where imperfections are not likely to cause leaks anyway. I used my trusty re-appropriated garden snips to trim the rubber to fit.
 |
| Prepare to snip.... |
 |
| Ready for reinstallation. The joint is under the cordstock/pointer, just to the right of center |
Everything got a good coat of Lanacote (why not?!) and was re-installed. So far, so good....
