Wednesday, June 13, 2012

rigging

jaw-jaw turnbuckles and eyes or single-jaw turnbuckles and studs?

1/4" wire 1/2" pin hayn: $46.35
jaw-jaw 1/2" turnbuckle:   $77.56 
------------$124
increased flexibility (so?)
more stuff to break/fall out

 1/4" wire 1/2" thread hayn stud: $38.78
single-jhaw 1/2" turnbuckle:  $56.00 
---------------------- $94
 
less flexibilty (so?)
less stuff to break
less stuff to catch other stuff
$30 cheaper (x4 + >30 x 2 capshrouds+>>30xbackstay==ca. $200)

------------------------------------------------------------------

Furler Guts

taking the sail feeder off didn't do anything - just crusty red loctite, and nothing moves. I suppose that's good....


Extrusion pulled up as far as it will go. It hits the masthead junk here. The big round doohickey is the internal turnbuckle, I think, and the long skinny jobber that's normally inside the extrusion looks to be an extra long swage fitting on the end of the wire. I hope. Maybe.

View of whole system with extrusion up as far as it will go


Shroud-->mast terminations

zoom and squint




P1283637 P1283644 P1283645 P1283647 P1283658 P1283659 P1283660 ------------------------------------------------------------------------
Bobstay
5/16 cable @ 6'
UpperTerminal - 5/8" eye - http://goo.gl/oYQ2W
LowerTerminal - 1/2" fork - http://goo.gl/a7NGn
Turnbuckle - 5/8 toggles - http://goo.gl/n504j
SpecialConcerns: The pin at the waterline seems small


Forestay/Furler
FurlerModel: Harken Series 1-193
5/16 cable @ 38'6" (order 40)
UpperTerminal - 1/2 eye - http://goo.gl/RDmNA
LowerTerminal -
Turnbuckle - none
SpecialConcerns
- 2" from top pin to furler-foil
- not sure what is under the drum on the bottom

Backstay
5/16 cable @ 39'6" (order 41)
UpperTerminal - 1/2" eye - http://goo.gl/RDmNA
LowerTerminal - 5/8 eye - http://goo.gl/oYQ2W
Turnbuckle - 5/8 toggles - http://goo.gl/n504j 

Upper Shrouds
9/32 cable @ 35' (order 36x2=72)
UpperTerminal - T-ball - http://goo.gl/Mr8rp (x2)
LowerTerminal - 1/2" eye - http://goo.gl/Amno4 (x2)
Turnbuckle - 1/2" toggles -  http://goo.gl/8YRya (x2)

LowerShrouds
1/4" cable @ 19' (order 20x4=80)
UpperTerminal - T-Ball - http://goo.gl/DXuNy (x4)
LowerTerminal - 1/2" eye - http://goo.gl/PZF1c (x4)
Turnbuckle - 1/2" toggle - http://goo.gl/8YRya (x4)











1 comment: