Table

The boat came with a very nice teak table plonked down right in the middle of everywhere and taking up way too much room.

We finally just unbolted the thing shoved it under a bed. We've tried various folding and rolling and collapsing tables, but all of them found a way to piss us off in one way or another. Dogs and babies and coffee habits and boats and shitty tables don't go so well together - who knew?!?

So, after a year or so of staring and drooling, a masterpiece emerges. It's perfect. It's wonderful. Sadly, it's also a mockup of a real table, made from $14 of Home Depot ply"wood," (can wood be that shity??) mostly cut out with my trusty sawzall. The heavy-wall stainless and teak slidy-hinge-thingee is real enough, so I just need to find wood, skills, and/or tools, replicate the table, and screw it to the hinge-thingee. If anyone knows someone in the SF Bay area who'd like to make me a real table...

The hinge is 2 pieces of 1.5" teak - crappy plantation stuff, but at least it was expensive - and 36" of heavy-wall 316 stainless tubing. The table is held on by 4-inch screws.

One bulkhead table, folded up out of the way

Folded down, folded up, slid in - it's almost entirely over the starboard setee and out of the way.

Open but not slid out, the boat is still mostly usable, although the head door won't open in this configuration.

Open and out. It's a couple inches narrower than the original table, and comfortably seats 4.

"Normal" position - easy access to head and V-berth, plenty of room for a laptop and legs. Also, I wanted to show that we really do own cushions. See the scars from the old table on the sole.

I think this is going to work well.

Also, if someone wants to buy a pedestal-mount table made out of 5/4 old-growth teak, make me an offer.